New product information

PCON・ACON・DCON-CYB/PLB/POB are now available for ROBO cylinder position controllers!!

Product information of the PCON・ACON・DCON-CYB/PLB/POB

Feature 1 Supports battery-less absolute encoder-installed products

No battery maintenance required, as there are no battery needed in it. No originations required on device restarts after emergency stop or malfunction-caused stopping, or in any occasion of start-ups. This reduces the working time and the production cost at the same time. The price is equivalent to of the conventional incremental encoders.

Feature 2 Compatible to Power Con®

Standard-installed with the high output driver "Power Con®" which draws out the ability of stepping motor.
Power Con improves the stepping motor output by approximately 50%.
This reduces the cycle time, leading to an improvement in machine productivity.

Feature 3 Smart tuning feature installed

Supports smart tuning feature, which sets the speed and acceleration/deceleration to a suitable level based on the payload(※).
(※)In order to activate the smart tuning function, the user requires either a PC software, or TB-02 (teaching tool).

Feature 4 Ample monitor feature

Active actuator and controller informations may be displayed on the PC screen in wave form, using PC software.
※Displayable information: command current value, current speed/position, PIO signal (start, positioning complete, alarm, etc.)

There are trigger function available, which starts the wave form display on to the PC screen, by pre-setting the PIO signal change-over points, operation time and others.

Feature 5 Predictive conservation

Outputs warning signs before overload errors, by detecting the change in average current value.