Product information of RCP4-ST
Features of RCP4-ST
Features 1 It is suitable for work stopper on conveyor line that does not have air power.
Features 2 Maximum weight of work that can be stopped is 150kg.
Type
Mass of work collision | Type |
---|---|
80kg |
RCP4-ST68E |
150kg | RCP4-ST615E |
Correlation diagram of work mass and work collision speed
Performance and specification
Stroke |
30mm |
---|---|
Maximum speed | 65mm/s |
Maximum acceleration speed | 0.2G |
Mass | 3.4kg |
Positioning repeatability | ±0.5mm |
Maximum work mass | ST615E : 150kg ST68E : 80kg |
Maximum work collision speed | 40m/min(660mm/sec) |
Installation orientation | Vertical (Only for enhance rod) ※Not applicable to horizontal / hanging type or ceiling type. |
Cable that connect Actuator an controller. |
CB-CA-MPA□□□ |
Life (Target) ※ | (No. of collision) Body : 5 millions times, shock absorber : 1 million times, (maintenance part) |
Temperature range. | 0℃~40℃ |
Humidity range. | Max85% (No condensation) |
※ Life vary depends on the usage condition, environment, maintenance (lubrication and cleaning)
Also Absorber is a maintenance part, so it is necessary to change regularly.