Product Information of Position Controller SCON-CAL
Features of Position Controller SCON-CAL
Features 1 Compact size.
Significant small size at the width of 49mm x height 158mm x depth 116mm compared to SCON-CA
It is possible to have controller as adherence installed. Help saving the space for control panel.
Features 2 Increase ability to maintenance.
Warning "WRG" by "LED" shows absolute battery voltage drop or low speed rotation fan This function is for monitoring the changing time for spare part. (it is also possible to be signal output)
Number of time and traveling distance that actuator moved will be calculated and recorded into the controller, and if it is exceeding the preset value, it will send the signal to outside. As a result, it is possible to check the timing to do the grease top up or periodic inspection. Also alarm history will be displayed in time of occurrence, which will enable the analysis of the alarm easier.
Features 3 Corresponding to various field network
Corresponding to CC-Link, DeviceNet, PROFIBUS-DP, MECHATROLINK-Ⅰ/Ⅱ, CompoNet, EtherCAT, EtherNet/IP, PROFINET IO
Features 4 Compatible to Safety category
Customer can build an outside circuit to correspondence to safety category 1-4.
Features 5 Capable for DIN Rail mounting.
Select the specification of DIN Rail mounting.
Features 6 The Difference of SCON-CA / SCON-CAL / MSCON
【Function Comparison Table】
(Note) The price is on incremental spec and 20-150W motor.
≪Function Description≫
③ Servo Motor Function : This function allows to check the current speed or position etc.
④ Off Board Tuning : This function calculates the best servo gain that matched transport load.
⑤ Vibration Control Function : This function is to suppress the vibration from work on slider during traveling on actuator slider.